Galvanized Concertina Razor Barbed Wire

 Galvanized concertina razor barbed wire is used for varied security fencing and barriers. It will be set directly on the bottom, mounted on the highest of fence or in rows as an independent barrier. To stop corrosion, barbed wire has a metal coating.

  Our galvanized concertina razor barbed wire is all hot dipped galvanized. Additionally hot galvanized, galvanized has another type - electro galvanized. Electro galvanized has less zinc - zinc on the surface of the barbed wire up to ten g/m2. barbed wire with electro galvanized can begin to rust in a year. We have a tendency to manufacture only barbed wire with hot dipped galvanized.

Standard Galvanized barbed wire
2 Ply , 4 Point. Barbs at every 100 mm centers.
barbed wire : 2.6 mm Diameter.
Line Wire: 2.0 mm diameter.
Concertina barbed wire Blade/Razor type
Coil Diameter before Set-up: 450 mm.
Approximate Diameter after Set-up: 435 mm.
Extended Length of coil (meter): fifteen meter.
Barbed tape 0.5 mm thick Heavily Galvanized Sheet.
Core Wire 2.5 mm Galvanized High Tensile Wire.
No. of turns per coil: 56.
Barb width: 15 mm.
Barb length: 21.2 mm.
C/C Barb Spacing: 35 mm.
No. of clips: 3.
Poles For Fencing (Height 2 m)
Structural Fencing Post.
Section: 30 × 30 × 3.0 mm.
Finish: galvanized iron.
Total Height: 2 meter.